Sharp AR-162

(3)
(1)
(2)
(3)
(3)
(3)
(4)
(1)
(2)
(1)
B. Charger wire
Installation: The spring tip must be between two reference ribs.
• The charger wire must be free from twist or bending.
• Be sure to put the charger wire in the V groove.
C. Duplex transport section <Only AR-206/207>
2. Optical section
No. Content
A Table glass
B Copy lamp unit
C Copy lamp
D Lens unit
A. Table glass
B. Copy lamp unit
Disassembly: Be sure to put No. 2/3 mirror unit to the positioning
plate (A).
Assembly: Put the notched surface of wire holder (3) downward,
tighten temporarily, and install.
Adjustment: Main scanning direction distortion balance adjustment
(2 )
(1 )
(1 )
(1 )
(1 )
(1 )
(1 )
(3 )
(1 )
(1 )
(2 )
(3 )
(3 )
(4 )
(2 )
(3 )
(2 )
(3 )
(1 )
(A )
(A )
(4 )
(4 )
(5 )
(6 )
(4 )
(5 )
AR-162 [11] DISASSEMBLY AND ASSEMBLY 10/5/2000
AR-162 DISASSEMBLY AND ASSEMBLY – 1