3. Note for replacement of consumable
parts
A. Toner cartridge
When a waste toner cartridge is removed from the machine, it must
be put in a polyethylene bag to avoid scattering of toner.
B. DV cartridge
Do not shake or put up the developer cartridge. Otherwise developer
may scatter.
[11] DISASSEMBLY AND
ASSEMBLY
WARNING: Before performing the disassembly procedure, be sure
to remove the power cord to prevent against an electric
shock.
No. Item
1 High voltage section/Duplex transport section
2 Optical section
3 Fusing section
4 Paper exit section
5 MCU
6 Optical frame unit
7 LSU
8 Tray paper feed section/Paper transport section
9 Manual multi paper feed section
10 Power section
11 Developing section
12 Process section
1. High voltage section/Duplex transport
section
No. Content
A Transfer charger unit
B Charger wire
C Duplex transport section <Only AR-206/207>
A. Transfer charger unit
(2 )
(1 )
(4 )
(3 )
(3 )
(5 )
(5 )
AR-162 [10] MAINTENANCE 11/21/2000
AR-162 MAINTENANCE – 2
To Next Page
Loading...
