Sharp AR-162

Main
code
Sub
code
Contents Details of operation
Initial
value
Set range
22 16 Duplex print counter
display
<Only AR-206/207>
Used to display the current duplex print counter value. ∗1
17 Copy counter display Used to display the current copy counter value. ∗1
18 Printer counter display
<Only when a printer
function is installed>
Used to display the current printer counter value. ∗1
19 Electronic sort counter
display <Only when an E-
sort function is
installed>
Used to display the current electronic sort counter value. ∗1
21 Scanner counter display Used to display the current scanner counter value.
24 1 JAM memory, JAM
counter clear
Used to clear the JAM memory and the JAM counter. ∗2
2 Trouble memory clear Used to clear the trouble memory. ∗2
4 SPF counter clear
<Only when an
SPF/RSPF is installed>
Used to clear the SPF counter. ∗2
5 Duplex counter clear
<Only AR-206/207>
Used to clear the duplex counter. ∗2
6 Paper feed counter clear Used to clear the paper feed counter. ∗2
7 Drum counter clear Used to clear the drum counter. ∗2
8 Copy counter clear Used to clear the copy counter. ∗2
9 Printer counter clear
<Only when a printer
function is installed>
Used to clear the printer counter. ∗2
10 Electronic sort counter
clear <Only when an E-
sort function is
installed>
Used to clear the electronic sort counter. ∗2
13 Scanner counter clear Used to clear the scanner counter. ∗2
25 1 Main motor operation
check
Execute the simulation with the developer cartridge removed, and the
main motor will rotate for 30 sec. At that time, the cooling motor rotates
at a low speed.
10 Polygon motor operation
check
Used to drive the polygon motor for 30 sec.
∗2: Display after clearing each counter
000 (0.75 sec) → Blank (0.35 sec) → 000 (0.75 sec) → Blank (1.0 sec) → Repetition
AR-162 SIMULATIONS – 6