E. Paper exit roller
Assembly: Insert the spring pin so that the waveform (A) of the
spring pin faces in the longitudinal direction of the paper
exit drive gear long hole (B).
Be sure to insert two ribs (C) into the groove (D).
5. MCU
No. Content
A MCU
A. MCU disassembly
Note: When replacing the MCU PWB, be sure to replace the
EEPROM of the MCU PWB to be replaced.
(3 )
(4 )
(6 )
(7 )
(5 )
(5 )
(1 )
(3 )
(2 )
(2 )
(4 )
(4 )
(5 )
(B )
(A )
(D )
(C )
(C )
(8 )
(6 )
(6 )
(7 )
(7 )
(1)
(1)
(2)
AR-162 [11] DISASSEMBLY AND ASSEMBLY 10/5/2000
AR-162 DISASSEMBLY AND ASSEMBLY – 6
To Next Page
Loading...
