Sharp AR-5516 User Manual

9
1
LOADING PAPER
The paper required indicator ( ) will light up when there is no copy paper in the selected paper feed tray, or when
the selected paper tray is not installed or is improperly installed.
PAPER
For best results, use only SHARP recommended paper.
*
1
A5 can be used in the upper paper tray but cannot be used in other trays (including trays in optional paper feeding unit).
*
2
When making a large number of copies or prints using 90 g/m
2
paper, remove the output from the paper output tray when
about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed to accumulate.
*
3
The number of sheets of the paper which can be set changes with the weight of a paper.
Special papers
Follow these guidelines when using special papers.
● Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended
paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must
be used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or
printing).
● There are many varieties of special paper available on the market, and some cannot be used with this
machine. Before using special paper, contact your authorised service representative.
● Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable.
Paper tray type Paper type Size Weight Capacity
Paper tray
250-sheet paper
feed unit
2 x 250-sheet
paper
feed unit
Standard paper
Recycled paper
A5*
1
B5
A4
B4
A3
56 g/m
2
to 90 g/m
2
*
2
250 sheets
(Load paper lower
than the line on the
tray)
Bypass tray Standard paper
Recycled paper
A6R to A3 56 g/m
2
to 90 g/m
2
100 sheets *
3
Transparency film
Labels
Load one sheet of
paper each time on
the bypass tray.
Thick paper A6R to A4 129 g/m
2
to 200 g/m
2
Load one sheet of
paper each time on
the bypass tray.
106 g/m
2
to 128 g/m
2
You can load multiple
sheets of paper on
the bypass tray.
A6R to A3 91 g/m
2
to 105 g/m
2
You can load multiple
sheets of paper on
the bypass tray.
Envelopes International DL
(110 mm x 220 mm)
International C5
(162 mm x 229 mm)
Commercial 9
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
5 sheets

Sharp AR-5516 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Speed	16 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Interface	USB 2.0
Dimensions	599 x 612 x 511 mm
Fax Resolution	Not available
Paper Size	A3