To Next PageTo Next Page
Need help?Do you have a question about the Sharp AR-5618N and is the answer not in the manual?
General| Brand | Sharp |
|---|---|
| Model | AR-5618N |
| Category | All in One Printer |
| Language | English |
Discusses laser product safety, radio interference, and multilingual warnings.
Provides warnings and instructions for safe battery replacement.
Offers guidance on the proper disposal of used batteries.
Covers essential notes for servicing, installation place, and ventilation requirements.
Details system configurations and optional component compatibility for various models.
Outlines specifications related to copy mode, including type, speed, and job efficiency.
Covers copy magnification, density, void width, auto duplex, and paper exit/finishing.
Details additional functions, other specifications, package, power, and digital performance.
Explains the printing function, platform support, and printer driver functions.
Details the scanner function, system, resolution, speed, interface, and supported OS.
Lists consumable parts, including toner cartridges, developers, and drum kits by region.
Specifies transport, use, and storage conditions for consumable parts.
Explains how to identify production numbers on toner and drum cartridges.
Illustrates the external appearance of the machine with numbered parts.
Shows the internal components of the machine with numbered labels.
Details the operation panel layout, keys, and indicators for user interaction.
Identifies and describes the function of various motors, solenoids, and clutches.
Lists and explains the function of various sensors and switches in the machine.
Identifies and describes the function of different Printed Wiring Boards (PWBs).
Provides a cross-sectional diagram showing key internal components and their functions.
Lists all adjustable items, their sections, and corresponding adjustment procedures.
Details the procedures for copier section adjustments, including developing doctor gap.
Covers adjustments for the mechanism section, including image position.
Details procedures for adjusting OC and SPF image lead edge and void amounts.
Explains adjustments for main and sub scanning direction distortion.
Details the procedure for adjusting main scanning magnification ratio.
Covers sub scanning magnification ratio and off-center adjustments.
Details SPF off-center and image density adjustments.
Explains how to enter, cancel, and use simulation modes.
Provides a comprehensive list of simulation codes and their functions.
Lists main codes, sub codes, and content for troubleshooting.
Provides detailed causes, checks, and remedies for specific trouble codes.
Details recommended maintenance checks, cleaning, adjustments, and replacements.
Explains how to check toner and developer life and maintenance status.
Provides notes on replacing toner and developer cartridges.
Details the disassembly procedures for the high voltage and duplex transport sections.
Provides disassembly instructions for the optical section components.
Details the disassembly and attachment procedures for the lens unit.
Covers disassembly of wire harnesses and the fusing section.
Details disassembly procedures for thermistor, heater lamp, and upper heat roller.
Provides disassembly instructions for the lower heat roller and separation pawl.
Covers disassembly of separation pawl and the paper exit section.
Details disassembly for paper exit sensors, transport roller, and exit roller.
Covers disassembly of MCU/NIC and the optical frame unit.
Details disassembly for the LSU and tray paper feed sections.
Covers disassembly of drive unit and paper feed clutch/roller.
Details the disassembly procedures for the bypass tray section.
Covers disassembly of bypass tray clutch, pressure plate, and feed clutch.
Details the disassembly procedures for the power unit and related components.
Covers the disassembly procedures for the developing box, doctor, and MG roller.
Details the disassembly procedures for the drum unit, main charger, and cleaning blade.
Covers disassembly of operation PWB, tray interface PWB, and sensors.
Details disassembly for 2nd tray sensors, clutch, roller, and main motor.
Covers disassembly of paper entry and paper empty sensors.
Describes the operational flow and components involved in paper feeding.
Outlines necessary files and preparation steps for firmware update.
Details the steps for performing the firmware download process.
Provides step-by-step instructions for installing the maintenance program on Windows 2000.
Explains the download procedures specifically for network models.
Presents a high-level block diagram of the machine's electrical system.
Provides detailed wiring diagrams illustrating component connections.
Provides guidance on using lead-free solder thread for repairs.
Offers important notes and precautions for soldering lead-free components.
