Sharp AR-5516S - User Manual

Other manuals for Sharp AR-5516S

Service Manual94 pages

Start Guide32 pages

Questions and Answers

C
carolinenelsonSep 14, 2025
Why can't I set the paper size for a paper tray on my Sharp AR-5516S All in One Printer?
- M
  Monica RossSep 14, 2025
  You cannot set the paper size for a paper tray on your Sharp All in One Printer if copying or printing is in progress, the machine has stopped temporarily due to running out of paper or a misfeed, or an interrupt copy job is in progress. Set the paper size after these processes are complete by loading paper or removing the misfeed, and after the interrupt copy job is finished.
C
Christopher TaylorSep 16, 2025
Why does a copy job stop before it is finished on my Sharp AR-5516S?
- J
  James LevineSep 16, 2025
  A copy job might stop before it is finished on your Sharp All in One Printer if the paper output tray is full or the tray is out of paper. Remove the copies in the paper output tray and press the [START] key to resume copying. Load paper if the tray is out of paper.
L
Lauren CampbellNov 20, 2025
What to do if my Sharp All in One Printer is not printing? (ON LINE indicator does not blink.)
- K
  Kyle GloverNov 20, 2025
  If your Sharp All in One Printer is not printing and the ON LINE indicator is not blinking, consider the following: * The machine might be set to off-line mode. Press the [ON LINE] key to turn on the ON LINE indicator. * The machine might not be correctly connected to your computer. Check both ends of the printer cable for a solid connection and try a known good cable. * A copy job might be in progress. Wait until the copy job is complete. * Your machine might not be selected correctly in the current application for the print job. When choosing "Print" from the "File" menu, ensure you have selected "SHARP AR-XXXX" printer in the "Print" dialog box. * The printer driver might not have been installed properly. Check if the printer driver is installed in the Control Panel under Pri...
K
Keith StevensNov 26, 2025
What to do if Sharp AR-5516S has a paper misfeed?
- J
  Jessica Melton DDSNov 26, 2025
  If your Sharp All in One Printer is experiencing paper misfeeds, consider the following: * To remove the misfeed, see "MISFEED REMOVAL". * Ensure you are using copy paper within the specified size and weight range. * Do not use curled or crimped paper. Replace with dry copy paper. During periods when the machine is not used for a long time, remove the paper from the tray and store it in a dark place in a bag to prevent moisture absorption. * Make sure the paper is properly installed. * Remove all pieces of misfed paper. * If the stack of paper is higher than the indicator line on the tray, remove some of the paper and reload so that the stack does not exceed the line. * Fan the paper well before loading it. * Adjust the guides on the bypass tray to match the width of the p...

Summary

BEFORE USING THE MACHINE

PART NAMES AND FUNCTIONS

Identifies and explains the various physical components of the machine.

POWER ON AND OFF

LOADING PAPER

Details the procedures for loading paper into the machine's trays and bypass.

COPY FUNCTIONS

NORMAL COPYING

Explains the basic steps for making a standard copy from document glass or SPF.

MAKING A COPY DARKER OR LIGHTER

REDUCTION;ENLARGEMENT;ZOOM

PRINTER FUNCTIONS

BASIC PRINTING

Outlines the fundamental steps for printing documents from a computer.

PRINTER DRIVER SETTING SCREEN

USER SETTINGS

ADJUSTING THE AUTOMATIC EXPOSURE LEVEL

CUSTOMISING SETTINGS (System Settings)

TROUBLESHOOTING

Provides a guide to resolving common machine and copying problems.

MISFEED REMOVAL

Step-by-step instructions for removing paper jams from various locations.

REPLACING THE TONER CARTRIDGE

Sharp AR-5516S Specifications

General

Print Technology	Laser
Type	Monochrome
Functions	Print, Copy, Scan
Print Speed	16 ppm
Print Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Max Paper Size	A3
Warm-up Time	25 seconds
First Copy Out Time	7.2 seconds
ADF Capacity	40 sheets
Duplex Printing	Manual
Interface	USB 2.0
Dimensions	599 x 612 x 511 mm
Paper Input	250-sheet tray