Sharp AR-M161 - Adjusting the Display Contrast

39
2
ADJUSTING THE DISPLAY CONTRAST
The contrast of the display can be adjusted as explained below.
1
Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
2
Select "DISPLAY CONTRAST" with
the [ ] or [ ] key.
3
Press the [OK] key.
The display contrast
adjustment screen will
appear.
4
Adjust the contrast with the [ ] or [ ]
key.
To reset the contrast to the
default setting, press the [C]
key.
5
Press the [SPECIAL FUNCTION] key.
You will return to the base
screen.
2-SIDED
COPY
SPECIAL FUNCTION
ACC.
DUPLEX SCAN
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
GHI
OK BACK
DISPLAY CONTRAST
SPECIAL FUNCTION
Pegasus-E_Copy_Ex.book 39 ページ ２００４年９月２３日 木曜日 午前１１時４１分