40
3
PERIPHERAL DEVICES AND
SUPPLIES
Optional equipment and supplies are explained in this chapter. To purchase optional equipment and supplies,
contact your authorised service representative.
OPTIONAL EQUIPMENT
Convenient optional equipment can be installed on the machine as needed.
Yes: Can be installed. No: Cannot be installed.
*1 The network expansion kit (AR-NB3) must be installed.
*2 The facsimile expansion kit (AR-FX11) must be installed.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
• Peripheral devices are normally optional, but are incorporated in some models as standard equipment.
AR-M161 AR-M162 AR-M165 AR-M206 AR-M207
Reversing single pass feeder (AR-RP6N)
No No Yes Yes Yes
Single pass feeder (AR-SP6N)
Yes Yes Yes Yes Yes
Document cover (AR-VR5)
Standard Standard Standard Yes Yes
250-sheet paper feed unit (AR-D24)
Yes Yes Yes Yes Yes
2 x 250-sheet paper feed unit (AR-D25)
Yes Yes Yes Yes Yes
Job separator tray kit (AR-TR4)
Yes Yes Yes Yes Yes
Dual function board (AR-EB9)
Yes Standard Standard Yes Standard
256MB expansion memory board (AR-SM5)
Yes Yes Yes Yes Yes
Facsimile expansion kit (AR-FX11)
Yes Yes Yes Yes Yes
8MB fax memory (AR-MM9)
Yes*
2
Yes*
2
Yes*
2
Yes*
2
Yes*
2
Network expansion kit (AR-NB3)
Yes Yes Yes Yes Yes
PS3 expansion kit (AR-PK1/N)
Yes*
1
Yes*
1
Yes*
1
Yes*
1
Yes*
1
Barcode font kit (AR-PF1)
Yes*
1
Yes*
1
Yes*
1
Yes*
1
Yes*
1
Flash memory kit (AR-PF2)
Yes*
1
Yes*
1
Yes*
1
Yes*
1
Yes*
1
Note
Chapter03.fm 40 ページ ２００４年１０月１４日 木曜日 午後６時４分
To Next Page
Loading...
