Sharp AR-M276

AR-M236/M276/M237/M277 SIMULATION 8 - 19
For the cassettes, only the option cassette is displayed.
For the job separator, the printer, and the PS3, which are provided as
standard provision, and when the GDI is installed, they are displayed
as STANDARD.
For the scanner, however, even though it is a standard unit, its model
name is displayed. For the NIC, when the SoftNic is installed, it is not
displayed. When the NIC board is installed, its model name is dis-
played.
Operation/procedure
Used to display the FAX send/receive counter.
The counter display is in 7 digits.
Note: Executable only when the FAX is installed.
Operation/procedure
Used to display the SPF/RSPF jam history data sequentially from the
latest one.
Forty SPF/RSPF jam histories are displayed sequentially from the lat-
est.
Operation/Procedure
Used to display the CRUM type.
Operation/procedure
Used to display the scanner counter.
The counter display is in 7 digits.
22-11
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to display the FAX send/receive counter (FAX
reception and print counter).
Section FAX
Item Counter
FAX SEND PAGE/TIME FAX send page and time
FAX RECEIVE PAGE/TIME FAX receive page and time
FAX OUTPUT FAX output (number of print)
22-12
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the misfeed positions and the number of
misfeed at each position. (When the number of
misfeed is considerably great, it can be judged as
necessary for repair.)
Section SPF/RSPF
Item Trouble Misfeed
Error code Name Sensor name
Paper Reached/
Not Reached to
the sensor
DFD_ND SPF/RSPF paper in
lead edge jam
SPF P-IN
sensor
Not Reached
DFD_ST SPF/RSPF paper in
rear edge jam
SPF P-IN
sensor
Reached
RDD_ND SPF/RSPF paper
out lead edge jam
SPF P-IN
sensor
Reached,
P_OUT Not
Reached
RDD_ST SPF/RSPF paper
out rear edge jam
SPF P-OUT
sensor
Reached, P_IN
passed (OFF)
JAM_REV SPF/RSPF duplex
reverse jam
SPF P-IN
sensor
Not Reached
(Paper after
reversing)
ORG_SHORT SPF/RSPF short
size error
SPF P-IN
sensor
Passed (OFF at
JAM)
ORG_LONG SPF/RSPF long
size error
SPF P-OUT
sensor
Reached
SPF P-IN
sensor
Reached
22-13
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to display the CRUM type.
Item Specifications
Item Content
00 Not fixed.
01 AR-A
02 AR-B
03 AR-C
04 DM (VER)
05 DM (WEB)
06 CHINA
99 Conversion completed.
22-19
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to display the scanner counter in the network
scanner mode.
Section Network scanner
Item Counter
SCANMODE Scanner mode counter