Sharp AR-M276

AR-M236/M276/M237/M277 SIMULATION 8 - 20
Operation/procedure
Jam/trouble counter is cleared individually. (The history of each
counter is deleted when clearing)
1. Select the counter to be cleared with the 10-key.
2. Press the [START] key.
The confirmation menu is shown.
3. Select "1: YES."
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
Used to clear each paper feed counter individually.
1. Select the counter to be cleared with the 10-key.
2. Press the [START] key. The confirmation menu is shown.
3. Select "1: YES."
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
Used to clear the original and staple counters individually.
1. Select the counter to be cleared with the 10-key.
2. Press the [START] key.
The confirmation menu is shown.
3. Select "1: YES."
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1. Press the [START] key. The confirmation menu is shown.
2. Select "1: YES."
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1. Press the [START] key.
The confirmation menu is shown.
2. Select "1: YES."
1: YES (Cleared)
2: NO (Not cleared) (Default)
24
24-1
Purpose Data clear
Function
(Purpose)
Used to clear the misfeed counter, the misfeed history,
the trouble counter, and the trouble history. (The
counters are cleared after completion of maintenance.)
Section Memory
Item Counter
Item Content
1
JAM JAM counter/JAM history
2
SPF JAM SPF/RSPF JAM counter/SPF/RSPF JAM history
3
TROUBLE Trouble counter/Trouble history
24-2
Purpose Data clear
Function
(Purpose)
Used to clear the number of use (the number of prints)
of each paper feed section.
Section Paper feed
Item Counter
Item Content
1 BYPASS Manual feed counter
2TRAY1 Tray 1 counter
3TRAY2 Tray 2 counter
4TRAY3 Tray 3 counter
5TRAY4 Tray 4 counter
24-3
Purpose Data clear
Function
(Purpose)
Used to clear the number data of use of the staple, the
SPF/RSPF and scanning.
Section Transport/Finisher
Item Counter
Item Content
1 SPF SPF/RSPF counter
2SCAN Scan counter
3 STAPLE Stapler counter
24-4
Purpose Data clear
Function (Purpose) Used to reset the maintenance counter.
Item Counter
24-5
Purpose Data clear
Function
(Purpose)
Used to reset the developer counter. (The developer
counter of the DV unit which is installed is reset.)
Section Image process (Photoconductor/Developing/Transfer/
Cleaning)
Developer/Toner hopper
Item Counter Developer