Sharp AR-M276

AR-M236/M276/M237/M277 SIMULATION 8 - 45
Note: Executable only when the FAX is installed.
Operation/procedure
Select the signal number with the 10-key, and press the [START] key.
By setting the signal number, signals are sent to the line and the
machine speaker. (Sending signals is continued until interruption com-
mand is made (by pressing [CUSTOM SETTINGS] key.)
By entering the signal number and pressing the [START] key during
execution, the signal kind can be changed.
Note: Executable only when the FAX is installed.
Operation/procedure
Press the [START] key.
The confidential ID table (confidential BOX numbers, confidential BOX
names, and confidential password) is printed.
The confidential data of My company mode is printed separately.
Note: Executable only when the FAX is installed.
Operation/procedure
Press the [START] key.
Used to input all image data (including confidential reception data,
remote send image, not-sent image) stored in image memory of the
FAX section.
34 DP MAKE Dial pulse (make) 1: 0dB
2: Soft SW
Maintain the make state with keeping
the condition to be able to send to the
dial pulse line.
35 DP BRK Dial pulse (break) 1: 0dB
2: Soft SW
Maintain the break state with keeping
the condition to be able to send to the
dial pulse line.
66-5
Purpose Operation test/check
Function
(Purpose)
Signal send mode (Signal send level soft SW setting)
Section FAX
Item Operation
Signal number Send signal
Send level
Selection
menu
1 NO SIGNAL Signal not sent None
2 33.6 V34 33.6 V34 –
3 31.2 V34 31.2 V34 –
4 28.8 V34 28.8 V34 –
5 26.4 V34 26.4 V34 –
6 24.0 V34 24.0 V34 –
7 16.0 V34 16.0 V34 –
8 19.2 V34 19.2 V34 –
9 16.8 V34 16.8 V34 –
10 14.4 V34 14.4 V34 –
11 12.0 V34 12.0 V34 –
12 9.6 V34 9.6 V34 –
13 7.2 V34 7.2 V34 –
14 4.8 V34 4.8 V34 –
15 2.4 V34 2.4 V34 –
16 14.4 V33 14.4 V33 –
17 12.0 V33 12.0 V33 –
18 14.4 V17 14.4 V17 –
19 12.0 V17 12.0 V17 –
20 9.6 V17 9.6 V17 –
21 7.2 V17 7.2 V17 –
22 9.6 V29 9.6 V29 –
23 7.2 V29 7.2 V29 –
24 4.8 V27t 4.8 V27t –
25 2.4 V27t 2.4 V27t –
26 0.3 FLG 7EH Flag signal Yes
Item Send signal
Send level
Selection
menu
1
27 CED2100 Tone signal Yes
28 CNG1100
29 0.3 V21
30 ANSam
31 RINGER Pseudo-ringer sound
([ON HOOK] key ON)
None
32 No MSG Voice message (no sound) None
Under the state where the ring back
tone can be sent to the line, keep the
sound composition IC volume to 0.
33 No RBT Ring back tone (no sound) None
Under the state where the ring back
tone can be sent to the line, keep the
G/A volume to 0.
34 DP MAKE Dial pulse (make) 1: 0dB
2: Soft SW
Maintain the make state with keeping
the condition to be able to send to the
dial pulse line.
35 DP BRK Dial pulse (break) 1: 0dB
2: Soft SW
Maintain the break state with keeping
the condition to be able to send to the
dial pulse line.
66-6
Purpose Data output, check
Function (Purpose) Printing the confidential password
Section FAX
Item Data Confidential/Pass code
66-7
Purpose Data output, check
Function (Purpose) Print the screen memory contents
Section FAX
Item Data Image data
Signal number Send signal
Send level
Selection
menu
1