13
Brightened
Dimmed
General Control
■
Demonstration mode
The first time the unit is plugged, the unit will enter the demonstration mode. You will
see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the X-
BASS/DEMO button.
The demonstration mode will be canceled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to select the extra bass
mode.
■
Display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
Basic Operation
– General Control –
*BA300_P13_15 00.11.16, 2:49 PM13
To Next Page
Loading...
