EasyManua.ls Logo

Sharp CD-BA300

Sharp CD-BA300
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Repeat Play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the 0/R (0 R) button twice.
To repeat a desired track:
Perform steps 1 - 4 in the “Programmed Play” section and then press the 0/R (0 R)
button twice.
To cancel repeat play:
Press the 0/R (0 R) button again.
R will go out.
Repeat or Random Play
Starting playback with a desired track
Random Play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
To cancel random play:
Press the 0R button.
Notes:
If you press the 2 / 4 button during random play, you can move to the track
selected next by the random operation. On the other hand, the 3 / 5 button
does not allow you to move to the previous track. The beginning of the track being
played will be located.
In random play, the CD player will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After using repeat or random play, be sure to press the (CD ) button.
Otherwise, the disc(s) will play continuously.
You can play a disc starting with the desired track.
1 While in the stop mode, press one of the
s s
s s
s 1 -
s s
s s
s 3 buttons or
DISC SKIP button to select the desired disc.
2 Press the
5 3 5 3
5 3 5 3
5 3 PRESET
X X
X X
X or
W W
W W
W PRESET
2 4 2 4
2 4 2 4
2 4 button to
select the desired track.
You can also select a track by pressing the
3 / 5 3 / 5
3 / 5 3 / 5
3 / 5 or
2 / 4 2 / 4
2 / 4 2 / 4
2 / 4 button on
the remote control.
3 Press the
0/R0/R
0/R0/R
0/R (
0 R0 R
0 R0 R
0 R) button to start playback.
The playback of the selected track is started.
When the last track of the disc with the selected track is played, the next disc
will be automatically started.
To stop playback:
Press the (CD ) button.
Notes:
When the DISC SKIP button is pressed during playback, playback will begin auto-
matically from the next disc.
When one of the s 1 - s 3 buttons is pressed during playback, playback of the
selected disc will begin automatically.
Selected disc number
Selected track number
Advanced CD Playback
– Starting playback with a desired track / Repeat or Random Play –
*BA300_P18_19 00.11.16, 2:51 PM18

Other manuals for Sharp CD-BA300

Related product manuals