Sharp CD-BA300

19
Programmed Play
1 While in the stop mode,
press one of the
s s
s s
s 1 -
s s
s s
s 3
buttons to select the de-
sired disc.
2 Press the
55
55
5
3 3
3 3
3 PRESET
XX
XX
X
or
W W
W W
W PRESET
2 4 2 4
2 4 2 4
2 4 button
to select the desired track.
You can also select a track by pressing the
3 / 5 3 / 5
3 / 5 3 / 5
3 / 5 or
2 / 4 2 / 4
2 / 4 2 / 4
2 / 4 button on
the remote control.
Selected disc number
Selected track number
3 Press the MEMORY/SET
(MEMORY) button to save the
track number.
When the track is memorized, “MEMORY” will appear.
4 Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5 Press the
0/R 0/R
0/R 0/R
0/R (
0 R0 R
0 R0 R
0 R) button to start playback.
Advanced CD Playback
– Programmed Play –
By specifying discs from 1 to 3, and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
To clear the programmed selections:
While in the stop mode, press the CLEAR but-
ton on the remote control.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
“MEMORY” will disappear.
Adding tracks to the program:
If a program has been previously stored, the “MEMORY” indicator will be displayed.
Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the last track of
the original program.
Notes:
● Opening the disc tray automatically cancels the programmed sequence.
● Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
● During program operation, random play is not possible.
Playback order
*BA300_P18_19 00.11.16, 2:51 PM19