To Next PageTo Next Page
Need help?Do you have a question about the Sharp CD-BA3000 and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| Playable Media | CD, CD-R/RW |
| Bluetooth | No |
| USB Port | No |
| Tuner Bands | FM |
| Cassette Deck | Yes |
| Speakers | 2-Way Speakers |
General specifications including power source, consumption, dimensions, and weight.
Details on output power and terminals.
Specifications for the CD player, including type, signal readout, D/A converter, and dynamic range.
Frequency range for FM and AM tuning.
Specifications for tape speed, signal/noise ratio, and wow/flutter.
Details on speaker type, input power, impedance, dimensions, and weight.
Lists and illustrates components and controls on the front panel.
Identifies connectors and the power lead on the rear panel.
Lists buttons and controls of the remote transmitter.
Identifies speaker components like tweeter, woofer, and terminals.
Step-by-step instructions for setting the clock on the main unit.
Procedure to reset the microcomputer, erasing all stored data.
General notes on usage and setup.
Important notes for safe and effective disassembly and reassembly.
Detailed steps for disassembling various parts of the unit.
Steps for disassembling the speaker unit components.
Procedures for removing and reinstalling tape mechanism parts.
Steps to remove and adjust the CD mechanism.
Driving force and torque checks for the mechanism.
Test procedure for tape speed adjustment.
Test stages and adjustments for FM RF signal.
Test stages and adjustments for AM IF and RF signals.
Notes on automatic adjustment functions for the CD system.
Details on automatically adjusted items like offset and gain.
Table listing CD error codes and their states.
Procedure to set the CD operation test mode.
Table listing pin numbers and voltage values for various ICs.
Explains resistor symbols, units, and types used in schematics.
Explains capacitor symbols, units, temperature compensation, and types.
Highlights safety-critical parts and the importance of using specified replacements.
Lists reference numbers, descriptions, and positions of various switches.
Illustrates and lists common transistor and LED types used in the unit.
Displays various waveforms from CD circuit signals for analysis.
Steps to troubleshoot when the CD section does not operate.
Instructions for using a CD optical pickup lens cleaner disc.
Precautions and warnings regarding the use of the CD cleaner disc.
Troubleshooting steps when a CD cannot be played.
Detailed steps and checks for the Focus-HF system.
Detailed steps and checks for the tracking system.
Detailed steps and checks for the spin system.
Steps to check the PLL system for CD playback issues.
Troubleshooting steps for no sound or sound dropouts with normal HF waveform.
Function table for the LA9235M servo amplifier IC.
Function table for the LC78641E servo/signal control IC.
Information required for ordering replacement parts.
Explains codes used for capacitors and resistors in parts lists.
Highlights safety-critical parts and the importance of using specified replacements.
Lists reference numbers, descriptions, and positions of various switches.
Illustrates and lists common transistor and LED types used in the unit.
List of integrated circuits with part codes and descriptions.
List of transistors with part codes and descriptions.
List of diodes with part codes and descriptions.
List of capacitors with part codes and descriptions.
List of resistors with part codes and descriptions.
Continuation of resistor list with part codes and descriptions.
List of miscellaneous circuitry parts.
List of accessories and packing materials with part codes.
List of CD mechanism parts with codes and descriptions.
List of cabinet parts with codes and descriptions.
Continuation of accessory list with part codes and descriptions.
Lists various PWB assemblies and their associated parts.
Lists an optional service part (CD cleaner disc).
