(Continued)
■ Test tone
You can check (and adjust) the speaker level by listening to
the sound output from each speaker individually, whilst stand-
ing at the actual listening position in the room.
The speaker level can be adjusted using the remote control.
1 Press the MENU button repeatedly to make "TEST
TONE" appear.
2 Within 10 seconds, press the ITEM button.
● The test tone will be heard from each speaker, in order,
at about 5 second intervals.
FRONT LEFT
↓
CENTER
↓
FRONT RIGHT
↓
RSURROUND
↓
LSURROUND
↓
S-WOOFER
● When the test tone is being output, the indicator for that
speaker will flash.
● The test tone will be heard until the current menu selection
is changed by pressing the MENU button again, or by
selecting some other function.
3 To adjust the speaker level whilst the test tone is being
output from a particular speaker, press the SET UP (
W
or
X
) button.
● The speaker level can be adjusted within a range of +7dB
to -7dB, in 1dB steps.
Notes:
● If "NO" is selected for any individual speaker’s size setting
(page 31), the test tone will not be heard from that
speaker.
● Please note that the front left and front right speaker levels
cannot be adjusted using this method.
Jog
dial
ITEM
ITEM
MENU
SET UP
MENU
1
3
2
CD-C491H(SUK) TINSE0229AWZZ
34
To Next Page
Loading...
Need help?
General
