Sharp CD-C491H User Manual

<P=004>
PREPARATION FOR USE
Right
Left
Red
Red
Black Black
Black
Red
RATED SPEAKER IMPEDANCE : 8 OHMS MIN.
IMPEDANCE NOMINALE DU
HAUT-PARLEUR : 8 OHMS MINIMUM
Red
Black
Black
Red
2
1
3
■ Speaker connection
Unplug the AC power lead from the AC socket before con-
necting or disconnecting any components.
For the front, centre and
sub woofer speakers
Red
Black
Length: Approx.
2 m (78-3/4")
For the surround speakers
Black
Black (with white line)
Length: Approx.
10 m (393-3/4")
Front speakers
Connect each front speaker wire to the FRONT SPEAKER ter-
minals as shown.
Use speakers with an impedance of 8 ohms or more, as lower
impedance speakers can damage the unit.
● Connect the black wire to the minus (-) terminal, and the red
wire to the plus (+) terminal.
Centre speaker
Connect the centre speaker wire to the CENTER SPEAKER ter-
minals as shown.
Use a speaker with an impedance of 8 ohms or more, as a lower
impedance speaker can damage the unit.
● Connect the black wire to the minus (-) terminal, and the red
wire to the plus (+) terminal.
Wires to be used with each speaker
How to connect the speaker wires
1 Hold the speaker wire release catch down.
2 Insert the wire into the speaker terminal.
3 Release the catch.
Caution:
When connecting the speakers to the unit, connect the wires to
the speakers first, and then to the terminals on the unit.
CD-C491H(SUK) TINSE0229AWZZ
4

Sharp CD-C491H Specifications

General

Brand	Sharp
Model	CD-C491H
Category	Stereo System
Language	English