29
CD-DVD500H
ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Other disc play features
This section explains how to use skip, resume, slow motion, and other playback fea-
tures.
Chapter skip
Whilst a disc is playing, press the PRESET X or W PRESET
button.
C
00
13/
15/
0
::01 23
DDV
The W PRESET button skips to the next chapter.
The PRESET X button skips to the beginning of the current chapter.
Press the PRESET X button again to skip to the beginning of the
previous chapter.
You can also press the / or / button on the remote control for the
same operation.
Notes:
Chapter information on some discs may not appear on the screen.
You may not be able to use this function with certain discs.
To resume playback after stopping
1
Whilst the disc is playing, press the button at the point you want to stop.
The system stores the point you stopped.
2 To restart play, press the
00
00
0 button.
Play resumes from a point slightly before the point it was stopped.
Press the 0 button to resume disc play, if auto playback starts from the begin-
ning of the disc when you reload the same disc after removing it.
This resume operation does not work in the following cases:
If you press the button twice.
If you press the button during auto playback.
If you remove a disc and then load another one.
Notes:
Resume playback is disabled on audio CDs.
After you press the button to stop playback, you can press the button again
and 0 button to resume playback from the beginning of the disc.
This operation may not be performed with certain types of discs.
Slow-motion play
1
Whilst a disc is playing, press the SLOW
00
00
0 button.
Three speeds are available. Each time the button is pressed, the speed of slow-
motion playback changes in the following sequence:
→1 (about 1/2) → 2 (about 1/8) → 3 (about 1/16)
2 Press the
00
00
0 button to return to the normal playback.
Notes:
On some discs, the slow-motion playback functions are disabled.
Slow-motion playback is disabled on audio CDs.
DVD playback
– Other disc play features
–
To Next Page
Loading...
