Sharp CD-DVD500H - Error Indicators and Warnings; Maintenance

73
CD-DVD500H
ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean
these parts with a cotton swab moistened with commercial head/pinch roller cleaner
or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages.
A Playback head D Erase head
B Capstan E Recording/Playback head
C Pinch roller
After long use, the deck’s heads and capstans may become magnetised, causing
poor sound. Demagnetise these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetise. Read the demagnetiser’s in-
structions carefully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Caution:
Do not use oil, solvents, petrol, paint thinners or insecti-
cides on the unit.
Maintenance Error indicators and warnings
The error indicators and warnings described below appear on the display whenever
there is a disc play problem, operational problem, etc.
Meaning
The disc is not compatible with this unit.
The region number of the DVD is not 2
or ALL.
You are trying to perform an incorrect
operation.
The disc does not support the operation
described in this operation manual.
Display
References
– Error indicators and warnings / Maintenance
–
C
01
83/
15/
0
::23 40
WRO NG D CIS T EYP
C
01
83/
15/
0
::23 40
REG NIO DCO E RER OR
SELECT
BITRATE Mbps
00 10
ENTER
O
1
N
ON
ON
hc15 .
ENTER
RETURN
S
G
NOT
LAL OWED
SELECT
BITRATE Mbps
00 10
ENTER
O
1
N
ON
ON
hc15 .
ENTER
RETURN
S
G
ACC SES
NDE I ED
TAPE 1
TAPE 2
A
C
C
D
E
B
B