Sharp CD-DVD500H - Recording from the Radio

65
CD-DVD500H
ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Tape recording
– Recording from the radio
–
1 Tune in to the desired station (see page 53).
2 Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3 Press the REC PAUSE
I6 I6
I6 I6
I6 (
I6I6
I6I6
I6) button.
Recording will be paused.
4 Press the
00
00
0 button to start recording.
To interrupt recording:
Press the REC PAUSE I6 (I6) button.
To resume recording, press 0 button.
To stop recording:
Press the ■ button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Recording from the radio
Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback
only.