67
CD-DVD500H
ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
■
Timer playback or timer recording
Before setting the timer:
1. Press the CLOCK button to check that the clock is accurate.
2. For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the TAPE 2
cassette compartment.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the DVD/CD, TUNER (BAND) or TAPE (1
VV
VV
V 2) button to select the
desired function.
To select the timer playback source: DVD/CD, TUNER (BAND) or TAPE (1 V 2)
To select the timer recording source: TUNER (BAND)
When you selected the TUNER (BAND), tune in to the desired station.
3 Adjust the volume using the VOLUME control.
Do not turn the volume up too high.
4 Press the TIMER/SLEEP button repeatedly until “
ff
ff
f PLAY” or “
ff
ff
f REC” is
displayed.
5 Press the TUNING/TIME (
XX
XX
X or
WW
WW
W) button to specify the hour to start, then
press the MEMORY/SET button.
The illustrations show the timer playback setting.
Timer operation
Timer playback:
The unit turns on and plays the desired source (DVD, CD, tuner, tape) at the preset
time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
Advanced features
– Timer operation –
For timer playback
For timer recording
Continued to the next page
To Next Page
Loading...
