Sharp CD-G7500V User Manual

E-63
ENGLISH
Tape Recording
CD-G7500DVD (S)
TINSZA159AWZZ
CD-G7500DVD
CP-G7500
CD-G7500DVD
DVD MINI SYSTEM
5
-DISC
CHANGER
Recording to a cassette tape (continued)
H Recording from a CD (CDs)
You can record the desired CD using the DIRECT PLAY button.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the DVD/CD button .
3 Load a cassette into the TAPE 2 cassette compartment with
the side A facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the button to choose one side or both sides.
… To record on both sides.
… To record on only one side.
5 Press the I6 button.
Recording will be paused.
6 Press one of the s 1 - s 5 buttons to select the desired
disc.
7 Within 5 seconds, press the DIRECT PLAY button to start
recording.
I Recording starts from side A.
I Recording is started from the selected CD. When the playback of
the last track is finished or the end of the tape is reached, the CD
and the cassette will stop automatically.
I CD playback will start approximately 7 seconds after the tape starts.
To stop recording:
Press the ■ button.
The CD and tape will stop.
Will disappear after short while display
*CD-G7500DVD(EN)60-65 05.1.13, 14:4563

Sharp CD-G7500V Specifications

General

Brand	Sharp
Model	CD-G7500V
Category	Stereo System
Language	English