E-68
ENGLISH
Advanced Features
CD-G7500DVD (S)
TINSZA159AWZZ
CD-G7500DVD
CP-G7500
7
12
When the preset time is reached, playback or recording will
start.
In the timer playback mode, the volume will increase gradually until it
reaches the volume you were listening to before your system entered
the timer stand-by mode.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer will operate at the same time every day. It will continue until
the daily timer setting is cancelled. Cancel the daily timer when it is not
used.
Timer and sleep operation (continued)
Note:
When performing timer playback or recording using another unit connected
to the GAME INPUT sockets, select “GAME” in step 9. This unit will turn on or
enter the power stand-by mode automatically, however, the connected unit
will not turn on or off.
Checking the timer setting in the timer stand-by mode:
1. Press the CLOCK/TIMER button.
2. Within 10 seconds, press the 5 3 or 2 4 button to select “ONCE”
or “DAILY”, and press the MEMORY/SET button.
3. Within 10 seconds, press the 5 3 or 2 4 button to select “ONCE
CAL” or “DAILY CAL”, and press the MEMORY/SET button.
The unit returns to the timer stand-by mode after displaying the settings in
order.
Cancelling the timer setting in the timer stand-by mode:
1. Press the CLOCK/TIMER button.
2. Within 10 seconds, press the 5 3 or 2 4 button to select “ONCE”
or “DAILY”, and press the MEMORY/SET button.
3. Within 10 seconds, press the 5 3 or 2 4 button to select “ONCE
OFF” or “DAILY OFF”, and press the MEMORY/SET button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the same
setting, perform the following operations.
1. Turn the power on and press the CLOCK/TIMER button.
2. Within 10 seconds, press the 5 3 or 2 4 button to select “ONCE”
or “DAILY”, and press the MEMORY/SET button.
3. Within 10 seconds, press the 5 3 or 2 4 button to select “ONCE
ON” or “DAILY ON”, and press the MEMORY/SET button.
4. Press the ON/STAND-BY button to enter the power stand-by mode.
Note:
The timer can also be set with the remote control.
Timer and sleep operation (continued)
*CD-G7500DVD(EN)66-71 05.1.13, 14:4568
To Next Page
Loading...
Need help?
General
