Sharp CD-G7500V User Manual

E-74
ENGLISH
References
CD-G7500DVD (S)
TINSZA159AWZZ
CD-G7500DVD
CP-G7500
7
Troubleshooting chart (continued)
H Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-by mode.
2. Whilst pressing down the
I6I6
I6I6
I6 button and the X-BASS/DEMO button, press
the
5 35 3
5 35 3
5 3 PRESET
X X
X X
X button until “CLEAR AL” appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.
H Condensation
Sudden temperature changes, storage or operation in an extremely humid
environment may cause condensation inside the cabinet (CD pickup, tape heads,
etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the
power on with no disc (or cassette) in the unit until normal playback is possible
(about 1 hour). Wipe off any condensation on the transmitter with a soft cloth
before operating the unit.
H Error indicators and warnings
The error indicators and warnings described below appear on the display when-
ever there is a disc play problem, operational problem. etc.
Display Meaning
C
01
83/
15/
0
::23 40
WRO NG D CIS T EYP
● The disc is not compatible with this unit.
C
01
83/
15/
0
::23 40
REG NIO DCO E RER OR
● The region number of the DVD is not 2
or ALL.
NOT
ALL EOW D
● You are trying to perform an incorrect
operation.
ACC SES
DEN DIE
● The disc does not support the opera-
tion described in this operation manual.
*CD-G7500DVD(EN)72-78 05.1.13, 14:4574

Sharp CD-G7500V Specifications

General

Brand	Sharp
Model	CD-G7500V
Category	Stereo System
Language	English