EasyManuals Logo

Sharp CV-P10PR User Manual

Sharp CV-P10PR
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
GB-13
ENGLISH
TURBO COOL OPERATION
The unit fan works at extra high speed with a setting temperature of 15°C.
1
Press the TURBO COOL button during
cooling mode.
• The remote control will display " ".
The temperature display will go off.
• The red MAXIMUM lamp will light.
TO CANCEL
Press the TURBO COOL button again.
• The red MAXIMUM lamp will turn off.
NOTES:
You cannot set the temperature or fan speed during TURBO
COOL operation.
The fan returns to the HIGH speed setting after the unit has
run for 30 minutes in TURBO COOL mode.
The extra high fan speed may automatically slow down to protect the unit.
TURBO COOL operation and SLEEP operation can not be used together.
SLEEP OPERATION
When SLEEP operation is set, the temperature setting is automatically adjusted to prevent
the room from becoming too cold.
1
Press the SLEEP button during cooling
mode.
• The remote control displays “ ”.
• The orange TIMER lamp will light.
• The unit will stop operating after 8 hours.
• The fan speed setting is set to AUTO.
TO CANCEL
Press the SLEEP button.
• The orange TIMER lamp will turn off.
NOTES:
One hour after the SLEEP operation is started, the tempera-
ture setting rises by 1˚C and after another hour it rises by
an additional 1˚C. Temperature display on the remote control
will not change from its original setting.
SLEEP operation and TURBO COOL operation can not be
used together.
The TIMER OFF, TIMER ON and SLEEP operation can not
be set together. Only the most recent settings will be used.
1˚C
1˚C
8hours
1hour 1hour
Start of SLEEP operation
Unit shuts off
1
1
01_CV-P10PR_OM_EN.indd 13 14/08/29 16:42

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp CV-P10PR and is the answer not in the manual?

Sharp CV-P10PR Specifications

General IconGeneral
TypeMonobloc mobile air conditioner
Hose length1.5 m
Noise level52 dB
Hose diameter140 mm
Ionic functionYes
Number of speeds3
Airflow (high speed)34.8 m³/h
Cooling capacity (max)- BTU/h
Dehumidifying capacity1 l/h
Timer duration (maximum)12 h
Air conditioner functionsCooling, Dehumidifying, Ventilating
Cooling capacity in watts (max)2500 W
Cooling capacity in watts (nominal)- W
Cooling energy efficiency (EER, W/W)-
Connected load960 W
AC input voltage220-240 V
AC input frequency50 Hz
Annual energy consumption (cooling)- kWh
Product colorSilver
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width500 mm
Height830 mm
Weight42000 g

Related product manuals