EasyManuals Logo

Sharp CV-P10PR User Manual

Sharp CV-P10PR
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
GB-19
ENGLISH
MAINTENANCE
Be sure to disconnect the power from the wall socket before cleaning.
CLEANING THE FILTER
If the lter is clogged with dust, the airow will be reduced, resulting in poor cooling per-
formance. The lter should be cleaned every two weeks.
AIR FILTER
1
REMOVE THE FILTER
• Pull the lter to the right.
2
CLEAN THE FILTER
• Use a vacuum cleaner to remove any dust. If the
lter is very dirty, wash it with detergent and rinse
carefully with clean water. Dry the lter before re-
installing them. Do not leave it in direct sun light.
3
REINSTALL THE FILTER
AIR INLET FILTER
Remove the grille and clean the air inlet
lter with a vacuum cleaner.
CAUTION:
Never operate the unit without the lter. Doing so may
result in serious damage to the unit.
CLEANING THE UNIT AND THE REMOTE CONTROL
Wipe them with a soft, dry cloth or with a cloth moistened with a mild soap. Carefully re-
move any residue by wiping with a damp cloth and dry completely.
Avoid splashing water onto the unit. Water can dangerously damage the electrical insula-
tion.
Never use harsh chemicals or abrasive cleaners on any part of the unit. To avoid damag-
ing the unit, do not use hot water (50°C or hotter) when cleaning.
WHEN STORING FOR A LONG PERIOD (NOT IN USE)
1
Perform drainage to drain out water within the unit and attach the stop-
cock securely to the drainpipe.
2
Operate the unit in the FAN or VENTILATION mode for about half a day
to thoroughly dry inside the unit.
3
Cleanthelters,thenreinstallthem.
4
Disconnect the power from the wall socket.
Air inlet lter
Air lter
Grille
01_CV-P10PR_OM_EN.indd 19 14/08/29 16:42

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp CV-P10PR and is the answer not in the manual?

Sharp CV-P10PR Specifications

General IconGeneral
TypeMonobloc mobile air conditioner
Hose length1.5 m
Noise level52 dB
Hose diameter140 mm
Ionic functionYes
Number of speeds3
Airflow (high speed)34.8 m³/h
Cooling capacity (max)- BTU/h
Dehumidifying capacity1 l/h
Timer duration (maximum)12 h
Air conditioner functionsCooling, Dehumidifying, Ventilating
Cooling capacity in watts (max)2500 W
Cooling capacity in watts (nominal)- W
Cooling energy efficiency (EER, W/W)-
Connected load960 W
AC input voltage220-240 V
AC input frequency50 Hz
Annual energy consumption (cooling)- kWh
Product colorSilver
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width500 mm
Height830 mm
Weight42000 g

Related product manuals