[JOB#2711]
TAX RATE PROGRAMMING
DEPRESSION OF THE ST KEY AT FOLLOWING POINTS PER-
FORM A TAX TABLE DELETE OPERATION.
A: Tax programming A
Tax1 1
Tax2 2
Tax3 3
Tax4 (For Swiss tax) 4
xxxxxx: Rate = 0.0000~99.9999%
LOWER TAX LIMITATION max. 999.99
(This is invalid in VAT system.)
MRS = 0
[JOB#2900]
<CAUTION>
(This JOB must be performed at X2/Z2 mode position.)
AUTO KEY SETTING
(Auto key function)
• This machine has [AUTO] key which can be programmed by the
following key-sequence.
• When [AUTO] key is depressed, the machine works the same as
the programmed key-sequence programed.
<Example>
Mode switch: (X2/Z2)
Mode switch: (REG)
Mode switch: (X2/Z2)
Mode switch: (REG)
3. Programming by direct key entry
1) PRICE PROGRAMMING for DEPT.
XXXXXXX: UNIT PRICE (Max. 7 digits)
MRS = 0
Note: Current price is displayed.
*
If [DEPT#] or [DEPTn] (same as displayed department number) is
depressed, programming mode is changed from "PRICE PRO-
GRAMMING" to "FUNCTION PROGRAMMING" (from "FUNC-
TION PROGRAMMING" to "PRICE PROGRAMMING").
2) FUNCTION PROGRAMMING for DEPT.
*
When starting setting, press [DEPTn] or [DEPTE#] key twice.
When continuing the same setting, press it once.
A: Taxable4 (For Swiss tax) A
Non taxable 0
Taxable 1
B: Taxable3 B
Non taxable 0
Taxable 1
C: Taxable2 C
Non taxable 0
Taxable 1
D: Taxable1 D
Non taxable 0
Taxable 1
E: SICS Function E
Normal 0
Single item cash sale 1
F: Limitation (Mantissa) = 1~9
G: Limitation (Exponebt) = 0~8
MRS = NORMAL, 18 HALO
Note: Current setting is displayed.
2711 XXXXXX
A
Declaration of TAX TAX rate
XXXXX
Lower tax limit
for add tax.
When lower tax
limit is 0.
✽
0
TL/NS
X X
TL/NS
X
0
2900 (Free key)AUTO
Max.20
TL/NS
AUTO2
AUTO3
AUTO4
AUTO
AUTO2
AUTO3
AUTO4
Delete
X
2900 AUTO 1 PLU 100 DEPT2 AUTO TL
X
100
Key entry R/J Display Comment
AUTO
PL
0011 same as entry
1
100
same as entry1
same as entry0
same as entry0
same as entryDEPT2
1 1 0 0 0 1 same as entry110
1
02
10
100
02
.
.
.
.
PLU
1
2900 AUTO2 100 AUTO2
TL
TL
X
10
100
TL
Key entry R/J Display Comment
DEPT1
1.00
000
same as entry0
same as entry0
same as entryTL
01
same as entry1
100
C
.
.
1
01
100
.
100
CA
.
100
CG
.
AUTO2