Sharp ER-A330

4. Service mode programming
The following are the key operation required for programming.
(In SRV mode)
(In PGM mode)
* JOB#901-A must be set to "0."
Details of [A][B][C][D] will be discussed at each item description.
★ mark is MRS setting.
[JOB #901]:MRS=0102
#901-A: 1. SRV programming in PGM mode
1. SRV programming in PGM mode 901-A
Enable 0 ★
Disable 4
#901-B: Tax system
1. TAX system 901-B
Auto TAX 1~4 0
Auto VAT 1~4 1 ★
Manual VAT 1~4 2
Manual VAT 1 3
Manual TAX 1~4 4
Swiss TAX 5
#901-C: 1. Rounding system
1. Rounding system 901-C
Normal 0 ★
SWEDEN 1
DENMARK 4
#901-D: 1. "00" key or "000" key selection
2. TAB setting
1. "00" key or "000"
key selection
2. TAB setting
901-D
"00" key
0 0
0.0 1
0.00 2 ★
0.000 3
"000"
0 4
0.0 5
0.00 6
0.000 7
[JOB#902] ER-A310: NOT USED MRS=0000
[JOB#902] ER-A330: MRS=0000
#902-A: 1. PLU quantity in ER-A330 for overlapped cashier de-
tailed receipt printing.
1. PLU quantity 902-A
750 0 ★
650 1
* To use the overlapped cashier function, the PLU number
must be set to 650.
#902-B, C, D: Not used (Fixed at "000")
[JOB#903] NOT USED: MRS=0000
[JOB#904] MRS=0000
#904-A: 1. Printing of date
1. Printing of date 904-A
★
Yes 0
No 4
#904-B: 1. Printing of consecutive No.
1. Printing of consecutive No. 904-C
★
Yes 0
No 4
#904-C, D: Not used (Fixed at "00")
XXX
(Job#)
[A] [B] [C] [D]
(DATA)
0
X TL/NS
XXX
(Job#)
[A] [B] [C] [D]
(DATA)
0
9
X TL/NS
– 5 –