Sharp ER-A410 User Manual

144
Setting the AUTO key — Automatic sequencing key —
If you program frequently performed transactions or report sequences for the AUTO keys, you can enter those
transactions simply by pressing the corresponding AUTO keys during key operations. This programming can be
done when your machine is in the X2/Z2 mode.
Programming for the
`
key and
¡
key as follows:
`
; entering a $1.50 item (PLU2) and a $1.00 item (dept. 3)
¡
; selling a $5.00 -programmed- item (dept. 2) for cash
• When the AUTO key has been programmed to execute a report job function etc., the mode switch
must be in the corresponding position.
• The AUTO sequence key can not be preset to another AUTO sequence key.
Note
2900
. @
2
P
100
3
¡
2
Ç
¡
Ç
AUTO1
setting
AUTO2
setting
`
`
UPC
PrintKey operation
Example
. @
2900
`
¡
™
`Ç
¡
™
Transaction
Delete
max. 50 times
££
¢¢
Procedure
2900
X2/Z2
ER-A410/A420(SEC)-4 03.12.22 0:20 PM Page 144

Sharp ER-A410 Specifications

General

Paper Width	58mm
Departments	99
Display	LCD
Printer	Thermal
PLUs	2000
Power Source	120V AC
Cash Drawer	5 bill
Weight	Approximately 11 kg