Sharp ER-A410 - Direct Programming; Setting the Date and Time

67
Time
Set the time using the military time (24-hour) system. For example, when the time is set to 2:30 AM, enter 230;
and when it is set to 2:30 PM, enter 1430. The time will be printed and displayed using a real-time system. Once
you set the time, the internal clock unit will continue to run as long as the built-in battery is alive and update the
date (day, month, year) properly.
Your machine is equipped with 20 (ER-A410)/10 (ER-A420) standard departments and a maximum of 99
departments. Your machine allows you to perform the following programming for each department.
Unit price
Unit price
1000
1
Ç
PrintKey operation
Example
ı
à
Ç
Unit price (max. 6 digits)
Dept. code (1 – 99)
To program the next sequential dept.
To program any dept.
To program zero
1
Unit price (max. 6 digits)
To program zero
·
99
Procedure
PGM 2PGM 1
Programming for departments
2
Time
1430
=
PrintKey operation
Example
=
Time (max. four digits)
XXXX
Procedure
PGM 2
ER-A410/A420(SEC)-3 03.12.22 0:18 PM Page 67