Sharp ER-A410 - PLU;UPC Programming; Unit Price; Functional Selection

70
Your machine is equipped with 500 standard PLUs/UPCs. Your machine allows you to perform the following
programming for each PLU/UPC.
• In this manual, the word “UPC” represents UPC (Universal Product Code) and the word “EAN”
represents EAN (European Article Number).
• To review the UPC codes available to this register, please refer to the chapter 13 in “Job-Code-
Based programming”.
Unit price
Functional selection
*
1
Item: Selection: Entry:
A Commission group number 0 thru 9
B Sign (plus/minus) Plus 0
Minus 1
C Food stamp status Ineligible 0
Eligible 1
D Tax 4 status Non-taxable 0
Taxable 1
E Tax 3 status Non-taxable 0
Taxable 1
F Tax 2 status Non-taxable 0
Taxable 1
(To be continued on the next page)
Procedure
PGM 2
Unit price
1
P
1000
ı
ı
Ç
PrintKey operation
Example
Procedure
PGM 2PGM 1
Note
PLU/UPC programming
3
When the price
level 2 is enabled.




Ç
PLU code (max. 5 digits)
To program for the following PLU/UPC
To program any PLU/UPC
To program zero
lÒ
ı
Direct PLU key
Unit price 1
(max. 6 digits)
ı
To program zero
Unit price 2
(max. 6 digits)
When the unit price 2 is disabled.
PLU/
UPC
Ä
UPC code (6 to 13 digits)
Ç
To program for the following PLU/UPC
To program any PLU/UPC
To program zero
lÒ
Direct PLU key
@
*
1
ABCDEFGHIJ
PLU code (max. 5 digits)
PLU/
UPC
Ä
UPC code (6 to 13 digits)
PLU/
UPC
ER-A410/A420(SEC)-3 03.12.22 0:18 PM Page 70