S T D A T
b
The date and time appear Inthe display and reports, and are printed at the top of
evety page you transmit. Set the date and time by pressing the keys on the
operation panel as shown below.
o T. correct a mistake. press the SPEED DIAL key to move the cursor back to
the mistake, and then enter the correct number.
1
Press the keys shown at left. “ENTRY
‘“~”” @
MODE” will appear in the display,
2 am
Press the keys shown at left. “DATE 3
TIME SET” appear !n the display
Press the START key.
4 m
Enter a 2-dlglt number ‘or the day f ’01”
to “31“).
(Example: the 5th)
5
Enter a 2-digit number for the month
(“01” for January, “02” for February. ’12”
(Example: January) for December etc.)
G @ @ (Eyample: 1996)
Enter the last 2 digits of the year,
,
7 @
Enter a 2-digit number for the hour (“00”
to “23”) and a 2-digit number for the mln-
(Example: 9:25)
ute “00” to “59”).
~m6
Press the START keyand then the
STOP key.
INITIAL SETTINGS 2-7
To Next Page
Loading...
