S T R M
Your fax has three modesfor receiving incoming calls and faxes:
ANS mode: Select this mode when you are out and want the built-in answenngma-
chine to answer all calls. Voice messages will be recorded. and fax messageswill
be receivedautomatically.
TEL mode: Select this mode when you are In and want to receive both voice calls
and fax messageson the same line. You must answer all calls, including fax mes-
sages, using the fax’s handset or an extension phone connectedto the same line.
FAX mode: Select this modewhen you only want to receivefax messageson
line. The fax will answer all calls and receive incoming fax messages automat-
}cally.(see also Fax/PhoneChangeover in Chapter 8.)
S t r m
RECEPTION
MODEFUNCTIONRESOLUTION
‘
o 0
h
o
your
Set the mode of reception with the RE-
CEPTION MODE key onthe panel
● To select ANS, press the key until
“GENERALOGM PLAY”appears in
the display (“ANS” will appear after
the general outgoing messageplays).
N A mode cannotbe selected
unless a general outgoingmes-
sage has been recordedas de-
scribed In ‘)AnsweringMachine
Set-up’iIn this chapter.
. To select TEL. press the key until
“TEL” appears in the display.
. To select FAX, press the key until
“FAX” appears Inthe display,
2-8
INITIAL SETTINGS
To Next Page
Loading...
