ANSWERING MACHINE SET-UP
A 3-digit passcodecan be programmed for each of the boxes. If this is done, the
passcode must be entered before messages in the box can be listenedto or
erased. Programa new passcode or clear a previously programmed passcodeby
pressing the panel keysas shown below.
+ The numbers “1”,
“2”, and “3” cannot be selected for the first digit of the
passcode.
1
FUNCTION
m
Press the keys shown at Iefi. “A.M. SET-
0
TINGS” will appear inthe display.
2
0
*
Press the keys shown at left. “BOX
PASSCODE” will appear in the display.
3
@
m
Press “ to enter a passcode,or “2” to
or
clear a previously programmed
passcode.
4
Enter the number of the box for which
@
you want to program or clear a
passcode by pressing the appropriate
numeric key.
(Example)
If you are clearing a passcode.go to
Step 6.
5
Enter a 3-digit passcodeby pressing the
number keys.
(Example)
6
Press the S key and
then the STOP key.
N ensure confidentiali~, passcodes cannot be checked.If you have forgot-
ten a passcode, clear it and program a new one.
2-12
INITIAL SETTINGS
To Next Page
Loading...
