STORING NUMBERS FOR AUTOMATIC DIALING
3
(Example)
Enter a 2-digit number (from “01” to
“50”) by pressing the number keys. This
will be the Speed Dial number.
4
Enter the fax or voice number by press-
ing the number keys (max.of 32 digits :n-
~ @ ~ ~ @ @ ‘~ eluding pauses).
(Example)
5
Press the START key,
6
Enter the name of the location or party
@ b b ... @
by pressing number keys as described
in “Entering Letters for Names” in this
chapter (max. of 10characters). If you
(Example)
don’t want to enter a name, skip this
step.
7
Press the S key.
8
STOP
o
Step 3 or G
Returnto Step 3 to store another num-
ber, or press STOP to exit. If the num-
ber will be usedfor Rapid Key Dialling,
you can write the name on the label
above the appropriate Rapid Key.
INITIAL SETTINGS
2-17
To Next Page
Loading...
