S D
R K D
If the number you want to dial has been stored as a Rapid Key number (see
“storing Numbers for Automatic Diailing” In Chapter 2), you can dial it by pressing
the appropriate Rapid Key.
Press the appropriate Rapid Key.
,01
02
03 ,04
,05
I
~~
06
‘ “n’ i ~
o
08 ,09
10
.o~
Im’‘
=
Example: To dial Speed
Dial number “02”, press
Rapid Key 02.
●
The name of the recelvlng party WIIIap-
pear in the display. If no name was
stored. the fax number Willappear (If
the name or number ISIncorrect,press
the STOP key.)
The document will be automatically
transmitted once the connection IS
made.
S D
If the number you want to dial has been stored as a Speed
dial it by pressing the SPEED DIAL key and then entering
“Storing Numbers for Automatic Dialling” in Chapter 2).
Dial number, you can
the 2-digit number (see
1
Press the SPEED DIAL key and then
CDCCn 111Af
n@@
enter the two digits of the Speed Dlat
) ,5 ~
number by pressing the number keys.
) @ @
. To enter numbers 1 through 9, fIrst en-
-,- .
~
ter Oand then the number.
2
-32-$,~i!~c,
m
Check the display, If the nameor num-
6
ber shown IScorrect, press the START
k
o
key. (If not, press the STOP key and
then repeat Step 1.)
FAX OPERATIONS
3-7
To Next Page
Loading...
