R O
Follow the steps below to listen to your messages from a remote Iocatlon.Note that
you can only access one box per call: If you want to access more than one box. you
must make a separatecall for each box.
N Youcan also access the FO-455 for remote operation when the reception
mode is set to FAX. /n this case. call the FO-455. press the “#” key /media-
tely afier It answers. or during pseudo ring!ng IfAutomatic Fax/Phone
ChangeoverISturned on (before you hear the fax tone in either case). and
then continue from Step 2 below.
1
m
Call the FO-455 from a touch-tone tele-
phone. When your outgoing message be-
gins, press the “#” key on the telephone.
● You will hear a short beep, and the
outgoing message will stop.
2
Enter the number of the box you want to
m
listen to. If you want to listen to the Gen-
(Example)
eral Box, skip this step.
3
(Example)
Enter the box’s passcode,or your re-
mote code number If the box does not
have a passcode. When finished. press
“#” on the telephone.
● You will hear a series of beeps equal
to the number of messages recorded
in the box, or one long beep if four or
more messages have been received.
The machine will then play back the
messages, beeping once at the end of
each message. When all messages
have been played back, you will hear
a long beep.
USING THE ANSWERING MACHINE
4-7
To Next Page
Loading...
