(
O F
The Transfer function is used to make the FO-455 automatlcal[v call you at a
specified number every time it receives an Incoming message in a selected box.
This lets you hearyour messages Immediately after they come In. evenwhen you
are at a remote location.
a t your recorded messagetelllng VOU
that the call is a transfer call. Enter “#”. the box number, the box’s passcode(or
your remote code number if the
boxhas no passccde). and “#” The CG-J53JVIII
then play back your messages. You can also perform any of the remcte o~erations
described in the previous section.
N Whenyou hang up after a :rat?stercall. /he FO-455 !vIIInot immediale’~~‘e-
/ease the //ne./fyou need to accept calls immediate/v after a transfer caI/.
enfer “*” ~lce before hanging up to free the Ilne (Ifyou want to hang IJpdul-
ing message playback. first enter”0” and ‘%”to stop p/ayback. then enter
“*” twice).
Prt t n
To use the Transfer function. you must first give the FO-455 the number IOcall (the
transfer number). This is done by pressing the panel keys as follows:
1 F
Press the keys shown at left. ‘A.hl. SET-
0
a
TINGS” WIIIappear Inthe ais~[a!~.
2
Pressthe keys shown at left. ‘?~ANS-
mmm m mm
FE~ # ENTRY” WIIIappear in the dispia!~
3
pressthe
S ~
-,,~!,2
0
@
Enter a transfer number ~max.~f 22 ~Ig-
4,= la ,= @ @ a @
Its ;ncluding pauses) by presslngthe
(Example)
number keys.
~
Press the START/MEMORY <eyan~
‘her?the STOP ke:j.
USING THE ANSWERING MACHINE
4-13
To Next Page
Loading...
