O S
Setting 8: AUTO FAX/PHONE CHANGEOVER
Press “1” (YES) to haveyour fax detect whether incoming calls are voice calls or
fax transmissions In automatic reception mode. Press “2” (NO) to turn the function
off.
. Factory setting: “2”
Setting 9: PSEUDO RINGING DURATION
, This sets the duration of pseudo ringing when Automatic Fax/PhoneChangeoveris
turned on. Enter a number from
“1to “2”as follows:
“1(15 SEC.):
15 seconds
“2” (30 SEC.):
30 seconds
● Factory setting: “1”
Setting 10: PAPERSAVE
This reduces the vertical length of documents received, allowing you to save paper.
Enter a number from “1” to “3” as follows (“S” will appear highlighted in the displav
while Paper Save is turned on):
“l” (MODE 1): Reduceonly the white spaces betweenlines.
“2” (MODE 2):
Reducethe entire document by 50°0(onlywhen
standard resolution is used).
“3” (NO): No Paper Save.
. Factory setting: “3”
Setting 11: TIME SAVE
This reduces the vertical length of documents transmitted by 20°0,saving line time
and thereby allowingyou to reduce telephone costs. Press “1”to turn the function
on, or “2” to turn it off.(”T” will appear highlighted in the display while Time Save is
turned on):
. Factory setting: “2”
Setting 12: DISTINCTIVE RINGING
This sets the ring pattern to which your fax will answer if you subscribe to a
distinctive ringingservice. Enter a number from “l” to 2“ to select a pattern. See
“Distinctive Ringing” in Chapter 2 for more details.
● Factory setting: “2”
O SE~lNGS
8-3
To Next Page
Loading...
