Entering and Using Programs
118
11
Press the START key and go to the
specific procedure for your operation
(see the following pages).
9
Press the START key.
10
Press the * key or the # key until the
desired operation appears in the
display.
Transmission (SEND MODE)
Confidential transmission
Polling
Serial Polling
Broadcasting
Relay Request
Batch transmission (this will only
appear if a timer setting was made)
Memory Polling (this will not appear
if a timer setting was made)
START
START
all-FO4700.book Page 118 Friday, November 4, 2005 9:17 AM
To Next Page
Loading...
