Sharp FP-J30E User Manual

E-10
Before calling for repair, please review the list below, since the problem may not be a unit malfunction
.
TROUBLESHOOTING
SYMPTOM REMEDY (not a malfunction)
Dust and smoke are not removed.
• Clean or replace the lter if they appear to be heavily
soiled. (Refer to E-8,E-9
)
A clicking or ticking sound is heard
from the unit.
• Clicking or ticking sound may be audible when the unit
is generating ions. (Refer to E-7
)
The discharged air has an odor.
• Check to see if the lter are heavily soiled.
Replace the lter.
• Plasmacluster Air Puriers emit small traces of ozone
which may produce an odor. These ozone emissions
are well below safety levels.
The Plasmacluster Ion Indicator
doesn’t Light on.
• Check to see if the SLEEP mode is selected.
The Plasmacluster Ion Indicator Light is turned off
3 seconds after the SLEEP mode is selected.
• Check to see if the Plasmacluster Ion OFF is selected.
Press
for 3 seconds to light On.
• Check to see if the Light Control OFF is selected.
Press
for 3 seconds to light On.
AUTO RESTART
• Even when the plug is unplugged or the breaker
is thrown during operation, the unit resumes at the
previous operation mode and settings if the power
recovers.
ON
(default)
OFF
(with the unit OFF)
(with the unit OFF)
If the , , lights Lights up for
10 seconds, the setting is ‘ON’.
(simultaneously for more than 3 sec.)
(simultaneously for more than 3 sec.)
If the
, , lights ashes for 3
seconds, the setting is ‘OFF’.
OM_FP-J30E_EN.indd 10 2017/11/10 16:50:00

Sharp FP-J30E Specifications

General

Brand	Sharp
Model	FP-J30E
Category	Air Cleaner
Language	English