E-14
OPERATION
MAIN UNIT OPERATION
Plasmacluster Lamp
1
Press the Main
Power Switch.
The Power Lamp is lit red.
2
Press the ON/OFF
Button
The Power Lamp is lit
green, and automatic op-
eration or operation at the
preset flow rate starts.
The fan level is switched as follows every time
the Fan Level Select Button is pressed.
AUTO
Silent
Medium
High
The fan level is automatically switched
between the five levels depending on
the amount of impurities in the air. The
sensors detect the impurities for effi-
cient air purification.
The unit will operate quietly using mini-
mal air intake.
Operates on the Medium fan level set-
ting.
Operates on the High fan level setting.
1
OPERATION
2
FAN LEVEL SET UP
To Next Page
Loading...
