EN-9
How to set Wi-Fi ON / OFF
after completing the inisial
set up
If you would like to turn the Wi-
Fi OFF:
Press
for 3 sec.
♪
～
OFF
NOTE
• Turning the Wi-Fi off will result in not being able to
control the air purifier with the designated App.
If you would like to turn
the Wi-Fi ON again:
(How to restore the Wi-Fi connection to
the original network.)
Press for 3
sec.
♪
The Wi-Fi Indicator will flash after you press the Wi-Fi
Button. And within about 3 minutes, you will hear four
short beeps. Some time after this beep sounds, the Wi-
Fi Indicator lights up and the Wi-Fi connection will be
restored to the original network. The designated App can
now be used again to control the Air Purifier.
NOTE
• Wi-Fi ON / OFF can also be set from “ : Wi-Fi
adapter ON/OFF”.
(Page 12, 14)
In this case, Wi-Fi connection with the router will be
automatically restored.
• Reconnection to the Wireless Router may take a few
minutes to complete, after turning Wi-Fi on again.
2.
Follow instructions on the App.
• If the Wi-Fi Indicator lights up, the connection is
successfully completed.
Light up
Tap “REGISTER”.
3 CONNECTION BETWEEN THE
AIR PURIFIER AND A SMART
DEVICE
1.
Tap “Register” for the air purifier
you would like to register.
(MODEL NAME)
• If you do not see the screen above, tap “ ” at
the “Home” screen, and select “Register Device”
“Already connected with a router”.
2.
Follow instructions on the App.
• If the Wi-Fi Indicator lights up, the connection is
successfully completed.
Light up
The INITIAL SET UP is completed.
To Next Page
Loading...
