Sharp GX-CD5100W - Enhancing Your System with External Devices; Recording from VCR;DVD to Tape; Listening to External Audio Sources

04/1/28 CX-GD5100V_EN2.fm
27
GX-CD5100W
Advanced Features
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
■ Listening to playback sounds of VCR, DVD, etc.
■ To record on a tape from VCR etc.
■ Headphones
● Before plugging in or unplugging the headphones, reduce the vol-
ume.
● Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
● Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
1 Connect a VCR, DVD, etc. to the CD/LINE INPUT sockets.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the LINE IN button.
4 Play the connected equipment.
You can enjoy sounds from the supplied speakers.
CD/LINE INPUT
RIGHT LEFT
VCR, DVD, etc.
Red White
To the line
output sockets
RCA lead
(not supplied)
Red
White
1 Insert a cassette in the TAPE 2 cassette compartment.
2 Press the LINE IN button.
3 Press the button.
4 Press the or button.
5 Play the VCR, etc.