E-18
HTCN400_500DVW_E.fm03/10/29
HT-CN400DVW
ENGLISH
92LCN500W0270
F
S
V
I
N
P
E
E
HT-CN500DVW
Preparation for Use
- Changing the setup menu -
Setup menu Selectable parameters (* indicates default settings.) Description
GENERAL SETUP TV DISPLAY NORMAL/PS The screen mode should be set according to the connected TV
type (for details, see page 20).
NORMAL/LB *
WIDE
TV TYPE MULTI * Selects the correct colour system (TV standard) (for details, see
page 20).
NTSC
PAL
OSD LANG ENGLISH * You can select the desired OSD (On Screen Display) language for
the setup menu or playback control screen.
FRENCH
GERMAN
ITALIAN
SPANISH
SCR SAVER ON A screensaver appears.
OFF * The screensaver is disabled.
SPEAKER SETUP CNTR DELAY 1 MS to 5 MS Adjust the delay time of the speakers (for details, see page 43).
OFF *
REAR DELAY 3 MS to 15 MS
OFF *
TEST TONE ON You can check the sound output from the speakers (for details,
see page 44).
OFF *
AUDIO SETUP DYNAMIC (*1) FULL * Audio with fully compressed dynamic range.
7/8 Audio with partially compressed dynamic range.
1/8
OFF Audio with uncompressed dynamic range.
-- GENERAL PAGE --
TV TYPE
MAIN PAGE
GENERAL SETUP
OSD LANG
SCR SAVER
TV DISPLAY
WIDE
NORMAL/PS
NORMAL/LB
-- SPEAKER SETUP PAGE --
REAR DELAY
MAIN PAGE
LOUD SPEAKERS SETUP
CNTR DELAY
TEST TONE
1MS
3MS
5MS
OFF
-- AUDIO SETUP --
MAIN PAGE
AUDIO RELATED
4/8
6/8
FULL
2/8
OFF
DYNAMIC
(*1)
Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital's dynamic range control allows you to adjust the sound range.
2
SHARP 92LCN500W0270
To Next Page
Loading...
