Sharp HT-CN400DVW

E-49
HTCN400_500DVW_E.fm03/10/29
HT-CN400DVW
ENGLISH
92LCN500W0270
HT-CN500DVW
References
- Error indicators and warnings / Maintenance / Specifications -
Error indicators and warnings
When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.
Maintenance
! Cleaning the cabinet
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
" General
" Amplifier (HT-CN400DVW)
Unit display Meaning
" The disc is not loaded.
" The disc is scratched or dirty and cannot be recogn-
ised.
" The disc is loaded up-side down.
" The region number of the DVD is not the number on
the back of the unit or "ALL".
TV screen Meaning
" The disc is not loaded.
" The disc is scratched or dirty and cannot be
recognised.
" The disc is loaded up-side down.
" The region number of the DVD is not the
number on the back of the unit or "ALL".
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunctions.
TITLE CHP A-B REPEAT 1SLEEPPROGPRESETTRK
KHz
MHz
TITLE CHP A-B REPEAT 1SLEEPPROGPRESETTRK
KHz
MHz
NO DISC
WRONG CODE
Power source AC 220 - 240 V, 50/60 Hz
Power consumption HT-CN400DVW:
Power on: 88 W
Power stand-by: 0.6 W
HT-CN500DVW:
Power on: 105 W
Power stand-by: 0.6 W
Dimensions Width: 430 mm (16-7/8")
Height: 53 mm (2-1/8")
Depth: 337 mm (13-1/4")
Weight 4.2 kg (9.3 lbs.)
Audio input terminals Analogue input (IN 1): RCA type 1 pair (L/R)
Analogue input (IN 2): RCA type 1 pair (L/R)
Audio output
terminals
Analogue output (OUT): RCA type 1 pair (L/R)
Video output
terminals
S-video output: S-terminal 1
Video output: RCA type 1
Output power Front speakers:
RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)
Centre speaker:
RMS: 30 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)
Subwoofer:
RMS: 50 W (10 % T.H.D., 100 Hz)
3
SHARP 92LCN500W0270