Sharp HT-CN400DVW

E-45
HTCN400_500DVW_E.fm03/10/29
HT-CN400DVW
ENGLISH
92LCN500W0270
HT-CN500DVW
Advanced Features
- Sleep operation -
Sleep operation
! Setting the sleep timer
You can set the unit to the power stand-by mode at the specified time.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the stand-by mode, press
the SLEEP button until "OFF" appears on the display.
To confirm the remaining sleep time:
Press the SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
MULTI
PRESET
ADJ/VOL
9
8765
4
0
>
10
321
ENTER
SLEEP
ST/MO
TUNING
DISPLAY LANGUAGE
MUTE
PROG
MENU/PBC
NTSC/PAL
STEP
A-B
REPEAT
ANGLE
DIRECT
LISTENING
SLOW/MEMORY
TITLE
ZOOM AUDIO
RETURN
MODE
SUBTITLE
SET UP
OPEN/
CLOSE
ON/
STAND-BY
ECHO
SLEEP
ON/
STAND-BY
1
Play back the desired sound source.
2
Press the SLEEP button.
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep time. The time will
decrease as follows.
3
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
A-B REPEAT 1PROGCHPPRESETTRKTITLE
KHz
MHz
CD MP3STEREO V
DIGITAL
Pro Logic
SLEEP
SLEEP
120 MINOFF 90 MIN 60 MIN
15 MIN 30 MIN 45 MIN