Sharp IG-DX10A

E-10
CLEANING AND MAINTENANCE
Main Unit
Every month or more often if necessary
Wipe with a dry soft cloth.
For stubborn dirt, use water and a mild detergent. And then, wipe with a wet cloth.
Make sure to dry out the main unit.
Plasmacluster Ion Generating Unit (electrode section)
Every 6 months or more often if necessary
Remove the dust attached to the electrode section of the unit with an included unit
cleaning brush or commercially-available cotton applicator.
(About removing the unit, please see
“ Plasmacluster Ion Generating Unit Replacement” on
E-11.)
• Do not touch the electrode section. (Otherwise, it may lead to injury.)
• Do not transform the electrode section. (Otherwise, it may lead to damage.)
• Do not touch the connection terminals. (Otherwise, it may lead to damage.)
• If the taint is hard, water a commercially-available cotton applicator slightly and wipe
off the unit.
Connection
Terminals
Unit Сleaning Brush
Electrode
Section (4 parts)
[ Before cleaning ] [ After cleaning ]
Electrode
Root of the
electrode
(When operated 24 hours a day)
IG-DX10A.EN.indd12IG-DX10A.EN.indd12 2011/11/0710:59:512011/11/0710:59:51