Sharp IG-DX10A User Manual

E-12
HOW TO REPLACE PLASMACLUSTER ION GENERATING UNIT
Before replacement, be sure to turn off the product, unplug the power cord, and
never handle the plug with wet hands.
Remove the Unit Cover.
1
Pull out the Unit Holder.
Remove the Plasmacluster Ion
Generating Unit.
Replace with a new Plasmacluster
Ion Generating Unit.
Insert the unit holder in the main
unit and attach the unit cover.
Insert the AC Adapter in an outlet and press the Operation
Button. Check the Unit Replacement Light is OFF.
2
3
4
5
6
Turn the Unit Holder and the Plasmacluster
Ion Generating Unit to the direction indicated
by an arrow and remove the Plasmacluster
Ion Generating Unit.
Unit Cover
Plasmacluster Ion
Generating Unit
Plasmacluster Ion
Generating Unit
Unit Holder
Unit Holder
Click
• Discard an old unit as nonburnable garbage.
• At the region where there is waste separation rule, follow the rule.
IG-DX10A.EN.indd14IG-DX10A.EN.indd14 2011/11/0710:59:522011/11/0710:59:52

Sharp IG-DX10A Specifications

General

Brand	Sharp
Model	IG-DX10A
Category	Air Cleaner
Language	English